Sony Cyber-Shot DSC-TX9 Flash Replacement 1 No'lu Adım Geçmişi

1. Adımdaki Değişiklikler

Düzenleyen: Yegor Shea — 25 Nis 2017

Düzenleme onaylandı tarafından Yegor Shea

-	[* red] ~~Using a Phillips head screw driver, remove~~ the two screws for the metal plate on the bottom.
-	[* orange] Detach the ~~smaller~~ ribbon cables by sliding them out.
-	[* yellow] Detach the ~~large ribbon cable~~ by flipping the small black holder in an upright position and then sliding the cable out carefully.
+	[* red] Remove the two screws for the metal plate on the bottom.
+	[* orange] Detach the no fuse ribbon cables by sliding them out.
+	[* yellow] Detach the ZIF connector cables by flipping the small black holder in an upright position and then sliding the cable out carefully.
	[* icon_caution] Remove ribbons slowly and carefully or they *WILL* rip.
+	[* icon_note] Screws are of Phillips type, head size Y0 and 0.3 mm in length.