| - | [* black] To remove the RAM door, use a ***Phillips #0*** bit. Put the RAM door to the side. |
|---|
| - | [* icon_note] Your computer will likely have plastic covers over the WWAN antennas. Mine are taped since I found a WLAN card installed here and did not have extra antenna covers. |
|---|
| + | [* red] To remove the RAM door, use a ***Phillips #0*** bit. Unscrew the RAM door and set the screw aside in a safe location. |
|---|
| + | [* orange] To remove the RAM door, pull it off from the side. This can be done with a plastic pry tool or your fingernail. |
|---|
| + | [* icon_note] Your computer will likely have plastic covers over the WWAN antennas. I found a WLAN card installed here and do not have any of these covers, so I used tape to cover them. |
|---|