Prerequisites Only 4 No'lu Adım Geçmişi

4. Adımdaki Değişiklikler

Düzenleyen: Yegor Shea — 25 Nis 2017

Düzenleme onaylandı tarafından Yegor Shea

-	[* red] The ~~small ribbon cable~~ can be removed by flipping the small black holder into the upright position and then sliding the cable out carefully.
-	[* orange] Once this has been done, use tweezers to unplug the lens’ circuit board from the motherboard.
+	[* red] The ZIF connector can be removed by flipping the small black holder into the upright position and then sliding the cable out carefully.
+	[* orange] Once this has been done, use tweezers to unplug the flat topped connector for the lens’ circuit board from the motherboard.
	[* icon_caution] *DO NOT* force the ribbon cables or they will rip.
+	[* icon_note] Refer to the ([guide\|25629]) page if you have trouble.