2. Adımdaki Değişiklikler
Düzenleyen: Chris Meseha —
Düzenleme onaylandı tarafından Chris Meseha
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [* icon_caution] You may need to apply adequate force to remove these screws and be careful not to strip them as they are relatively weak. |
|---|---|
| [* black] Using a PH0 Philip’s screwdriver, unscrew and remove the four 1.2mm Philip’s screws on the front of the E-mount. | |
| - | [* icon_note] You may need to apply extra force to remove these screws but be careful not to strip them as they are relatively weak. Also, these screws are very small so make sure you do not misplace them. |
| + | [* icon_note] These screws are very small so make sure you do not misplace them. |
| + | [* icon_note] If a screw is stripped, you will need to refer to the [guide|13213|ifixit stripped screw removal guide] |