Ana içeriğe geç

Bu Adımdaki Değişiklikler

Düzenleyen: Derek

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Unplug the orange video connector from the camera.
+[* black] Disconnect the camera from the motherboard.
+ [* black] There are 1.5mm gaps on either side of the connector between the connector and its port. Put the pointed end of the spudger in one gap at a time and use it to pry the connector out.
+[* black] If the connector has not been fully pried out by the spudger, you may remove it by had by pulling it out, as shown in the pictures on the left.