Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Richard

Düzenleme onaylandı tarafından Richard

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] When the metal piece is removed using the same tool unscrew the four 1.2 mm Phillips #1 screws on the plastic piece of the stand
-[* black] Now separate the top of the stand from the plastic bottom piece
+[* black] When the metal piece is removed, unscrew the four 1.2 mm Phillips #1 screws on the plastic piece of the stand
+[* black] Now separate the top of the stand from the plastic bottom piece.
[* black] Unplug the battery from the stand.
[* black] Plug back and reassemble. If problems are still occurring replace new battery.