1. Adımdaki Değişiklikler
Adım Satırları
| [title] Disconnect the flat flex | |
| - | [* black] Disconnect the flat flex cable over the hard drive. Put it to the side for later. |
| + | [* black] Disconnect the flat flex cable over the hard drive. To do this, lift the black locking tab up and remove the cable from the ZIF socket. Put it to the side for later. |
| [* black] To remove the drive from the chassis, lift the drive out from the back. Once the back tabs on the drive bumpers are released, pull the drive forward and it will be freed from the system. | |
| [* black] Disconnnect the drive cable. To do this, wiggle the cable back and fourth until it comes off. ***Do not force the cable off of the old drive. It can be difficult to remove if the hard drive has never been replaced before.*** | |
| + | [* icon_note] If you wish to keep the daughterboard flat flex out of your way, you can remove the board assembly if you wish. This isn't required, but can help if it keeps getting in the way. |