| [* icon_note] ***''The I/O daugherboard can be removed if it is in the way.''*** |
---|
| [* black] Disconnect the flat flex cable over the hard drive. To do this, lift the black locking tab up and remove the cable from the ZIF socket. |
---|
| [* black] To remove the hard drive, tilt it forward starting with the SATA interface. Once it is removed, set it aside as shown. |
---|
| [* black] Disconnnect the drive cable. Wiggle the cable off until it is released. ***''Do not force the cable off of the old drive. It may be slightly more difficult on a system that has never been serviced.''*** |
---|