Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Arthur Shi —

Düzenleme onaylandı tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* redblack] Use the T5 screwdriverpoint of a spudger to removepry up and disconnect the two black 4mm screws which holdinterconnect cable from the screen connector shield in placemotherboard.
[* black] Gently removeicon_reminder] To reconnect during reinstallation, align the cable with the socket and use your finger to press down on one side, followed by the other. If done correctly, the cable should be firmly held in place by the metal screen connector shieldsocket.
[* redblack] Use the T5 screwdriverpoint of a spudger to removepry up and disconnect the two black 4mm screws which holdinterconnect cable from the screen connector shield in placemotherboard.
[* black] Gently removeicon_reminder] To reconnect during reinstallation, align the cable with the socket and use your finger to press down on one side, followed by the other. If done correctly, the cable should be firmly held in place by the metal screen connector shieldsocket.

Resim 1

Eski Sürüm

Yeni Sürüm

Resim 2

Önceki resim yok

Eklendi