Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Lincoln Colby

Düzenleme onaylandı tarafından Lincoln Colby

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Use the T5 screwdriver to undo the two screws which hold the screen connector shield in place.
[* black] After the shield has been removed, use the spudger or your fingernail to removelift off the connector that holds the screen in place, being careful not to damage the connector.
[* black] After the shield has been removed, use the spudger or your fingernail to removelift off the connector that holds the screen in place, being careful not to damage the connector.
[* black] Once the connector is removed, remove the display assembly completely and place it off to the side.