Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

4. Adımdaki Değişiklikler

Düzenleyen: Arthur Shi

Düzenleme onaylandı tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_caution] Be careful not to damage the connector when performing this step.
[*
black] Use the point of a spudger or your fingernail to lift off the connector that holds the screen in place.
[* black] Lift off the display assembly completely
pry up and place it off todisconnect the side.
[* icon_reminder] Gently scrape any remaining adhesive
interconnect cable from your phone. Use a small amount of high concentration isopropyl alcohol (at least 90%) to clean the frame and prep it forbottom daughterboard.
[* icon_note] You can leave
the new screen adhesive.
[* icon_reminder] The replacement adhesive should only be applied
interconnect cable attached to the edges ofdaughterboard via the frame, but may come with the center filled in.
[* black] To
adhesive, or you can completely remove the unnecessary center section of the adhesive strip, carefully peel away the perforated rectangle in middle of the white backing. At the same time, peel up the black adhesive underneath the white backing.
[* icon_note] Only adhesive for the edges of the frame should remain
it.
[* icon_caution] Be careful not to damage the connector when performing this step.
[*
black] Use the point of a spudger or your fingernail to lift off the connector that holds the screen in place.
[* black] Lift off the display assembly completely
pry up and place it off todisconnect the side.
[* icon_reminder] Gently scrape any remaining adhesive
interconnect cable from your phone. Use a small amount of high concentration isopropyl alcohol (at least 90%) to clean the frame and prep it forbottom daughterboard.
[* icon_note] You can leave
the new screen adhesive.
[* icon_reminder] The replacement adhesive should only be applied
interconnect cable attached to the edges ofdaughterboard via the frame, but may come with the center filled in.
[* black] To
adhesive, or you can completely remove the unnecessary center section of the adhesive strip, carefully peel away the perforated rectangle in middle of the white backing. At the same time, peel up the black adhesive underneath the white backing.
[* icon_note] Only adhesive for the edges of the frame should remain
it.

Resim 1

Eski Sürüm

Yeni Sürüm

Resim 2

Eski Sürüm

Yeni Sürüm