3. Adımdaki Değişiklikler
Düzenleyen: Andrew Bookholt —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Grab the front bezel near the top edge of the iMac and lift it straight up off the rear case. |
|---|---|
| - | [* icon_caution] The front bezel is still attached to the iMac by two cables. |
| - | [* icon_note] If your front bezel does not immediately lift off the rear case, lift the lower edge of the front bezel for enough clearance to insert a spudger near the top corners of the bezel and push up the two metal arms locking the bezel to the rear case. |
| + | [* black] Insert a plastic card up into the corner of the air vent slot at the top of the rear case. |
| + | [* black] Push the card toward the top of the iMac to release the front bezel latch. |
| + | [* icon_note] Pull the front bezel away from the rear case. |
| + | [* black] Repeat this process for the other side of the front bezel. |