iRobot Roomba 880 Cleaning Head Replacement 1 No'lu Adım Geçmişi

1. Adımdaki Değişiklikler

Düzenleyen: Kristen Gismondi — 7 Haz 2017

Düzenleme onaylandı tarafından Kristen Gismondi

	[* black] Flip the Roomba over, wheel-side up.
-	[* red] Using a Phillips #1 screwdriver, loosen the four 15 mm screws illustrated. Two are located on the ''battery door'', while two are on the ''bottom panel''.
-	[* black] Remove the ''battery door'', pulling straight up from the two indents above the screws.
+	[* red] Using a Phillips #1 screwdriver, loosen the four 15 mm screws illustrated. Two are located on the battery door, while two are on the bottom panel.
+	[* black] Remove the battery door, pulling straight up from the two indents above the screws.