5. Adımdaki Değişiklikler
Düzenleyen: mayer —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* icon_reminder] Allow the EMI shield to hang down from the display. | |
| - | [* red] Remove the four coarse-thread T10 Torx screws securing the display to the rear case. |
| + | [* red] Remove the four 8 mm with 2 mm thick head coarse-thread T10 Torx screws securing the display to the rear case. |
| [* icon_note] These screws are recessed, so a thin screwdriver such as [product|IF145-014|this] is essential for removal. Bit drivers tend to be too short for this application. | |
| [* icon_note] It is strongly recommended to use a magnetized screwdriver so the screws won't fall into the iMac. |