Eşyalarını Tamir Et Topluluk Mağaza

1. Adımdaki Değişiklikler

Düzenleyen: Taylor Dixon —

Düzenleme onaylandı tarafından Taylor Dixon

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Turn off the device.
-[* black] [guide|11677|Prepare an iOpener] to heat the edges of the display and soften the adhesive underneath. Alternatively, you may use a heat gun or hair dryer to heat the adhesive.
- [* icon_note] The surfaces near the speaker and microphone (top and bottom respectively) have larger adhesive sections. These areas may require slightly longer heat exposure. Heat will help soften the adhesive securing the display, making it easier to separate. The display should be heated until it's slightly too hot to touch, for roughly two minutes.
+[* black] [guide|11677|Prepare an iOpener] to heat the edges of the display and soften the adhesive underneath. Alternatively, you may use a heat gun or a hair dryer.
+ [* icon_note] The surfaces near the speaker and microphone (top and bottom respectively) have larger adhesive sections. These areas may require slightly longer heat exposure. The display should be heated until it's slightly too hot to touch, for roughly two minutes.