3. Adımdaki Değişiklikler
Düzenleyen: Jordan Byrnes —
Düzenleme onaylandı tarafından Jordan Byrnes
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Starting on the right side of the handlebar, wrap the new tape around the end in a clockwise direction moving inward. Be sure to wrap tight, but don't rip it! |
|---|---|
| - | [* black] Using the scissors, cut the tape at an angle towards the inside of the bar. |
| - | [* black] Wrap the loose end with either electrical tape or the adhesive piece provided with the handlebar tape. |
| + | [* black] Starting on the right side of the handlebar, wrap the new tape around the end in a clockwise direction moving inward. |
| + | [* icon_caution] Be sure to wrap the tape tight, but don't pull so hard that it rips! |
| + | [* black] Using the scissors, cut the tape at an angle towards the outside of the bar. |
| + | [* black] Wrap the loose end with either electrical tape or the adhesive piece provided with the handlebar tape (pictured here) |