Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

4. Adımdaki Değişiklikler

Düzenleyen: Taylor Dixon

Düzenleme onaylandı tarafından Taylor Dixon

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] Wedge an opening tool into the notch that is located at the bottom right partcorner of the phone.
[* red] Wedge an opening tool into the notch that is located at the bottom right partcorner of the phone.
[* black] Slide the opening tool across the bottom and up the left side of the device and lift the mid-frame. This is to avoid the ribbon cable center top.
[* icon_note] Hearing clicks as you lift the mid-frame off is normal because of the clasps holding it down.
[* icon_note] If the clasps fail to come undone, try pushing the edge you're working on inwards to loosen them up.
[* icon_caution] When lifting the mid-frame, be careful not to damage the ribbon cable connecting the earpiece speaker to the motherboard.

Resim 1

Eski Sürüm

Yeni Sürüm