Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

4. Adımdaki Değişiklikler

Düzenleyen: Taylor Dixon

Düzenleme onaylandı tarafından Taylor Dixon

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] Wedge an opening tool into the notch that is located at the bottom right corner of the phone.
[*
black] Slide the opening tool across the bottom and up the left sideboth sides of the device in the small space between the midframe and lift the mid-frame. This isrear case to avoidrelease the ribbon cable center top.
[*
clips holding it in place.
[*
icon_note] Hearing clicks as you liftNote that the mid-frame off is normal because ofclips do not release by sliding ''through'' them, but rather the clasps holdinginward pressure the opening tool creates as it downenters the gap ''around'' them.
[* icon_note] If the clasps fail to come undone, try pushing the edge you're working on inwards to loosen them upinward with your hand.
[* icon_caution] When lifting the mid-frame, be carefulDo not attempt to damageremove the midframe yet! There is still a fragile ribbon cable underneath connecting the earpiece speaker to the motherboard.
[* red] Wedge an opening tool into the notch that is located at the bottom right corner of the phone.
[*
black] Slide the opening tool across the bottom and up the left sideboth sides of the device in the small space between the midframe and lift the mid-frame. This isrear case to avoidrelease the ribbon cable center top.
[*
clips holding it in place.
[*
icon_note] Hearing clicks as you liftNote that the mid-frame off is normal because ofclips do not release by sliding ''through'' them, but rather the clasps holdinginward pressure the opening tool creates as it downenters the gap ''around'' them.
[* icon_note] If the clasps fail to come undone, try pushing the edge you're working on inwards to loosen them upinward with your hand.
[* icon_caution] When lifting the mid-frame, be carefulDo not attempt to damageremove the midframe yet! There is still a fragile ribbon cable underneath connecting the earpiece speaker to the motherboard.