Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

4. Adımdaki Değişiklikler

Düzenleyen: Taylor Dixon

Düzenleme onaylandı tarafından Taylor Dixon

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Slide the opening tool up both sides of the device in the small space between the midframe and the rear case to release the clips holding it in place.
[* icon_note] Note that the clips doare not releasereleased by sliding ''through'' them, but rather the inward pressure the opening tool creates as it enters the gap ''around'' them.
[* icon_note] Note that the clips doare not releasereleased by sliding ''through'' them, but rather the inward pressure the opening tool creates as it enters the gap ''around'' them.
[* icon_note] If the clasps fail to come undone, try pushing the edge you're working on inward with your hand.
[* icon_caution] Do not attempt to remove the midframe yet! There is still a fragile ribbon cable underneath connecting the earpiece speaker to the motherboard.