Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

4. Adımdaki Değişiklikler

Düzenleyen: Taylor Dixon

Düzenleme onaylandı tarafından Taylor Dixon

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Slide the opening toolpick up both sides of the device in the small space between the midframe and the rear case to release the clips holding it in place.
[* icon_note] Note that the clips are not released by sliding ''through'' them, but rather the inward pressure the opening toolpick creates as it enters the gap ''around'' them.
[* icon_note] If the clasps fail to come undone, try pushing the edge you're working on inward with your handhand, or using a thicker tool like a spudger.
[* black] Slide the opening toolpick up both sides of the device in the small space between the midframe and the rear case to release the clips holding it in place.
[* icon_note] Note that the clips are not released by sliding ''through'' them, but rather the inward pressure the opening toolpick creates as it enters the gap ''around'' them.
[* icon_note] If the clasps fail to come undone, try pushing the edge you're working on inward with your handhand, or using a thicker tool like a spudger.
[* icon_caution] Do not attempt to remove the midframe yet! There is still a fragile ribbon cable underneath connecting the earpiece speaker to the motherboard.