Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Taylor Dixon

Düzenleme onaylandı tarafından Taylor Dixon

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Wedge a spudger underneath the battery to remove it from the device.
+[* black] The battery is lightly adhered to the rear case. Carefully wedge a spudger or an opening pick underneath the battery to remove it from the device.
[* icon_caution] Try your best not to deform the battery during this process. Soft-shell lithium-ion batteries can leak dangerous chemicals, catch fire, or even explode if damaged. Do not use excessive force or pry at the battery with metal tools.
[* icon_caution] Do not reuse the battery after it has been removed, as doing so is a potential safety hazard. Replace it with a new battery.
[* icon_reminder] To install a new battery:
[* black] Remove any remaining adhesive from the phone, and clean the glued areas with isopropyl alcohol and a lint-free cloth.
[* black] Secure the new battery with [guide|113604|pre-cut adhesive|new_window=true] or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the phone, not directly onto the battery. The adhesive should go around the perimeter of the battery compartment, but not in the rectangular cutout in the center (which is actually the back side of the display).
[* black] Press the battery firmly into place for 5-10 seconds.

Resim 2

Önceki resim yok

Eklendi

Resim 3

Önceki resim yok

Eklendi