Eşyalarını Tamir Et Topluluk Mağaza

20. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen —

Düzenleme onaylandı tarafından Jeff Suovanen

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Repeat the process you used on the center-right battery cell to finish separating the adhesive on the center-left cell:
- [* black] Lift and flip the two outer battery cells to clear access to the remaining side of the center-left battery cell.
- [* black] Push one corner of a plastic card below the plastic battery frame and underneath the remaining side edge of the center-left battery cell.
+ [* black] Lift and flip the two outer battery cells to clear access to the remaining adhered edge of the center-left battery cell.
+ [* black] Slide your card all the way under the battery cell and leave it to prevent the cell from re-adhering.
[* black] Slide your card all the way underneath the battery cell, and leave it there for a few moments to prevent the battery cell from re-adhering.
[* black] Remove the first card that you inserted under this battery cell in the previous step.