Eşyalarını Tamir Et Topluluk Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Alex —

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Take the opening tool and locate the two clips holding the wire ribbons that connect the black box to the motherboard.
-[* black] With the plastic opening tool (your fingernail works fine, too) flip up the black part of the clip. (There is a hinge on the side opposite the ribbon.
+[* black] Find the two clips holding the motherboard to the black box.
+[* black] Slide the plastic opening tool in between the ribbon and the black part of the clip, then flip it up. (If difficult, your fingernail can also be used)