Eşyalarını Tamir Et Topluluk Mağaza

2. Adımdaki Değişiklikler

Düzenleyen: Madison Cranmer —

Düzenleme onaylandı tarafından Madison Cranmer

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Remove all 18 of the 4mm screws using a Phillips #000 screwdriver.
-[* black] Remove back grey frame starting at the top, gently pulling away from the screen until you feel resistance.
+[* red] Using a Phillips #000 screwdriver, remove all 18 of the 4mm screws.
+[* black] With the blue plastic opening tool, gently wedge the tool between the screen and the gray frame until you feel resistance.
[* icon_note] Do not force the frame off because you can break off the teeth securing the frame to the screen.
-[* black] Push in the teeth with the blue plastic opening tool, towards the center of the device, while gently pulling off the frame simultaneously.
-[* black] Once removed, do not pull the grey frame completely away from the device.
+[* black] Push in the teeth with the blue plastic opening tool, towards the center of the device, and gently pull off the frame.
[* icon_note] The gray frame will still be connected to the device by a pair of wires from the motherboard to the speaker.