Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Adam O'Camb

Düzenleme onaylandı tarafından Adam O'Camb

Önce
Sonra
Değiştirilmemiş

Adım Satırları

+[* black] In the following steps you will be cutting through the adhesive around the edge of the rear glass panel.
+[* black] Areas of interest are as follows.
+ [* red] Areas of adhesive (in addition to the edge of the rear case).
+ [* orange] Avoid sticking the spudger blade in too far here, to avoid damaging the home button ribbon cable.

Resim 1

Önceki resim yok

Eklendi