2. Adımdaki Değişiklikler
Düzenleyen: Adam O'Camb —
Düzenleme onaylandı tarafından Adam O'Camb
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] In the following steps you will be cutting through the adhesive around the edge of the rear glass panel. | |
| [* black] Areas of interest are as follows. | |
| - | [* red] Areas of adhesive (in addition to the edge of the rear case). |
| - | [* orange] Avoid sticking the spudger blade in too far here, to avoid damaging the rear button ribbon cable. |
| + | [* red] Areas of adhesive (in addition to the adhesive on the edge of the rear case). |
| + | [* orange] Avoid sticking the spudger blade in too far here, to avoid damaging the rear button ribbon cable and chip. |