8. Adımdaki Değişiklikler
Düzenleyen: Adam O'Camb —
Düzenleme onaylandı tarafından Adam O'Camb
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Slide the blade of a halberd spudger into the opening on the edge of the rear button bracket. | |
| - | [* icon_note] Careful not to push directly against the rear button ribbon cable, to avoid damaging it. |
| + | [* icon_caution] Careful not to push directly against the rear button ribbon cable, to avoid damaging it. |
| + | [* icon_caution] Do not push the spudger in too far, to avoid damaging the rear button. |
| [* black] Continue sliding the spudger blade around the base of the bracket to cut all the adhesive holding the bracket to the rear case. | |
| [* black] Remove the bracket. |