9. Adımdaki Değişiklikler
Düzenleyen: Jeff Suovanen —
Düzenleme onaylandı tarafından Jeff Suovanen
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Use the flat edge of a spudger to pry the headphone jack cable connector from its socket on the logic board. | |
| - | [* icon_note] This connector is located on the bottom right edge of the logic board, near the right speaker. (The right speaker is removed in these |
| - | [* |
| + | [* icon_note] This connector is located on the bottom right edge of the logic board, near the right speaker. (The right speaker is removed in these images, but you don't need to remove it for this procedure.) |
| + | [* black] Push the cable slightly to the right. |