18. Adımdaki Değişiklikler
Düzenleyen: Adam O'Camb —
Düzenleme onaylandı tarafından Adam O'Camb
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
+ | [* black] Lift the RAM module to an angle of about 30 degrees and slide it out. |
---|---|
+ | [* icon_caution] When handling the RAM module, touch only the outside edges. Take care not to touch the gold-colored contact points along the bottom edge. |
+ | [* icon_reminder] To install a new RAM module, slide it in place at about the same angle until it is snug, and then swing it downward until the two clips snap into place. |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi