Choosing the Right Screwdriver Bit 3 No'lu Adım Geçmişi - iFixit

3. Adımdaki Değişiklikler

Düzenleyen: Richard — 7 Tem 2017

Düzenleme onaylandı tarafından Richard

: Önce
: Sonra
: Değiştirilmemiş

Adım Satırları

	[title] J vs PH
	[* black] Bits with the prefix "*J" and "PH*" are often thought to be the same bit. Don't be fooled by their similar appearance—they are quite different.
-	[* black] *~~J0, J00, J000~~* ~~- Japanese Industrial Standard~~.
-	[* black] *~~PH0, PH00,~~ ~~PH000~~* ~~- Phillips~~.
-	[* icon_caution] *J* ([[Media 54 Bit Driver Kit#Section_JIS\|JIS]]) and *PH* ([[Media 54 Bit Driver Kit#Section_Phillips\|Phillips]]) driver bits are not always interchangeable. ~~They~~ *do not* share identical physical properties.
+	[* black] *Phillips (PH)* screws are designed to make a screwdriver cam out if too much torque is applied. This prevents damage to screws and screwdrivers or bits.
+	[* black] *Japanese Industrial Standard (J)* screws do not provide a cam-out option, and have 90 degree corners.
+	[* icon_caution] *J* ([[Media 54 Bit Driver Kit#Section_JIS\|JIS]]) and *PH* ([[Media 54 Bit Driver Kit#Section_Phillips\|Phillips]]) driver bits are not always interchangeable. As you can see, they *do not* share identical physical properties.