Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: David

Düzenleme onaylandı tarafından Jake Devincenzi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] With heat gun/hair dryer start warming up the covers. This serves to loosen up the glue that keeps the glides attached to the mouse.
+[* black] With a heat gun/hair dryer start warming up the covers. This serves to loosen up the glue that keeps the glides attached to the mouse.
[* black] Once hot, try to gently lift the glide and work the edges. (to reapply it back on heat the gliders but not to hot to burn but to make the the glue soft, then firmly hold it in place till it cools and holds it grip.)
[* black] Once glidez are removed, screws are in plain sight
[* red] DO NOT TOUCH OR STAIN THE STICKY PART OF THE GLIDEZ, otherwise they will not stick back.