Eşyalarını Tamir Et Topluluk Mağaza

6. Adımdaki Değişiklikler

Düzenleyen: Adam O'Camb —

Düzenleme onaylandı tarafından Adam O'Camb

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Inspect the logic board and any connectors for [https://www.youtube.com/watch?v=DsDpALKQjUQ&feature=youtu.be&t=3m44s|signs of corrosion|new_window=true], especially in areas where the liquid contact indicators have changed color.
[* black] Check any external ports (charging port, headphone jack, SIM card slot, etc.) for corrosion as well. These may have to be cleaned out or replaced.
-[* black] If there are no signs of corrosion or moisture, leave the phone disassembled in a warm, dry place for a day or two to make sure any trapped water evaporates.
-[* black] If there are signs of corrosion or debris or the phone fell into dirty/acidic/sticky liquid, or you just want to be safe, continue for more thorough cleaning.
+[* black] If there are no signs of moisture, leave the phone disassembled in a warm, dry place for a day or two to make sure any trapped water evaporates.
+[* black] If there are signs of moisture, the phone fell into dirty/acidic/sticky liquid, or you just want to be safe, continue for more thorough cleaning.