Eşyalarını Tamir Et Topluluk Mağaza

11. Adımdaki Değişiklikler

Düzenleyen: Adam O'Camb —

Düzenleme onaylandı tarafından Adam O'Camb

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] When all components are clean and dry, reapply the EMI shields and reassemble the phone with a [https://www.ifixit.com/Store/iPhone/iPhone|new battery|new_window=true], and a new display if necessary.
- [* icon_note] If your iPhone requires adhesive for reassembly, do not apply it yet, as you may need to open the phone again for further repairs.
-[* icon_caution] Lithium and other types of rechargeable batteries do not tolerate submersion well. Again, any sign of bubbling, bulging, melting, or discoloration on the battery indicates that it is toast. Use a fireproof container for temporary storage and transportation to a battery recycling facility.
- [* icon_note] See [http://www.call2recycle.org/safety/damaged-defective-and-recalled-batteries/|this site|new_window=true] for safety guidelines regarding damaged batteries. Make sure to recycle your old battery and other e-waste at a [[E-Waste|certified recycler|new_window=true]].
+[* black] If you were unable to remove all the EMI shields, use compressed air or a blow-dryer on its cold setting to blow underneath the shields and dry out any trapped alcohol.
+[* black] When all components look clean and dry, reapply any EMI shields that you removed and begin to reassemble the phone with a new battery, and a new display if necessary.
+ [* black] Do not completely assemble the phone yet. Make sure internal components are screwed down and everything is plugged in, including the battery and display cable, but do not apply adhesive, screw down cover plates, replace external screws, or seat the display.
+ [* icon_note] It is safe to start the phone like this, but turn the phone back off before you start working inside it again. You just want to test the phone while keeping the internals accessible in case there are any problems.