Canon PowerShot A1000 IS Case Disassembly 8 No'lu Adım Geçmişi

8. Adımdaki Değişiklikler

Düzenleyen: Sam Goldheart — 5 Eyl 2013

Düzenleme onaylandı tarafından Sam Goldheart

-	[* icon_~~note~~] When replacing the cover, pull out the AV/USB rubber cover. This makes it easier to put both of the case pieces back together.
-	[* ~~black~~] Replace the front cover first. Leave the bottom of the cover out at a bit of an angle, it makes it easier to attach the top fingers when you replace the back cover.
-	[* ~~black~~] To put the back cover on, start at the top and snap the three latches together. The cover screws can be replaced in any order you please.
+	[* icon_reminder] When replacing the cover, pull out the AV/USB rubber cover. This makes it easier to put both of the case pieces back together.
+	[* icon_reminder] Replace the front cover first. Leave the bottom of the cover out at a bit of an angle, it makes it easier to attach the top fingers when you replace the back cover.
+	[* icon_reminder] To put the back cover on, start at the top and snap the three latches together. The cover screws can be replaced in any order you please.