Eşyalarını Tamir Et Topluluk Mağaza

8. Adımdaki Değişiklikler

Düzenleyen: Shelby Hemphill —

Düzenleme onaylandı tarafından Marty Rippens

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* icon_reminder] When replacing the cover, pull out the AV/USB rubber cover. This makes it easier to put both of the case pieces back together.
-[* icon_reminder] Replace the front cover first. Leave the bottom of the cover out at a bit of an angle, it makes it easier to attach the top fingers when you replace the back cover.
-[* icon_reminder] To put the back cover on, start at the top and snap the three latches together. The cover screws can be replaced in any order you please.
+[* icon_reminder] When replacing the cover,remove the AV/USB rubber cover for easier reconstruction.
+[* icon_reminder] Replace the front cover first leaving a small gap on the left hand side of the device for easy reattachment of the back cover.
+[* icon_reminder] Reattach the back cover by aligning it with the front cover and snapping the latches into place. Secure with screws in any order.