DJI Phantom 4 Shell Replacement 19 No'lu Adım Geçmişi

19. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen — 31 Tem 2017

Düzenleme onaylandı tarafından Jeff Suovanen

-	[* black] ~~Unsolder~~ all 12 of the motor wires that connect to the drones mother boards.
-	[* ~~black~~] *''++DO NOT++''* cut the cables with wire cutters, they are enameled wire and are a pain in the butt to solder back together and have them still work. Do yourself a favor and just ~~unsolder~~ them from the board.
-	[* ~~black~~] For reassembly, note the order of the cables. While the drone is upside down, black is the top wire, grey is middle, and white is bottom.
+	[* black] [guide\|750\|Desolder\|new_window=true] all 12 of the motor wires that connect to the drones mother boards.
+	[* icon_caution] *''++DO NOT++''* cut the cables with wire cutters—they are enameled wire and are a pain in the butt to solder back together and have them still work. Do yourself a favor and just desolder them from the board.
+	[* icon_reminder] For reassembly, note the order of the cables. While the drone is upside down, black is the top wire, grey is middle, and white is bottom.