4. Adımdaki Değişiklikler
Düzenleyen: Adam O'Camb —
Düzenleme onaylandı tarafından Adam O'Camb
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* icon_caution] Note that the CPU will most likely remain stuck to the underside of the heat sink as it's lifted out. Take care not to damage it. | |
| [* black] Lift and remove the heat sink assembly from the logic board. | |
| - | [* icon_reminder] When reassembling your iMac, follow our [guide|744|thermal paste application guide|new_window=true] to reapply the thermal paste to the graphics processor (GPU). You should also replace the thermal compound or apply thermal pads to the [guide|95863|VRAM chips|stepid=177392|new_window=true]. |
| + | [* icon_reminder] When reassembling your iMac, remove the CPU from the heat sink and [guide|95863|reinstall|stepid=177597|new_window=true] it separately from the heat sink. This will make sure it's installed correctly and prevent damage. |
| + | [* icon_reminder] Follow our [guide|744|thermal paste application guide|new_window=true] to reapply the thermal paste to the graphics processor (GPU). You should also replace the thermal compound or apply thermal pads to the [guide|95863|VRAM chips|stepid=177392|new_window=true]. |