8. Adımdaki Değişiklikler
Düzenleyen: Arthur Shi —
Düzenleme onaylandı tarafından Arthur Shi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* icon_caution] ***Be very careful*** not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges. | |
| [* icon_caution] Do not let any of the exposed solder joints come in contact with a metal surface, as that can cause a short. | |
| [* icon_note] Flip the power supply over to access the DC power cable connection behind the logic board. | |
| - | [* black] To disconnect the cable, squeeze [https://d3nevzfk7ii3be.cloudfront.net/igi/2WIdmLVMDvtTNjQZ| |
| + | [* black] To disconnect the cable, squeeze the [https://d3nevzfk7ii3be.cloudfront.net/igi/2WIdmLVMDvtTNjQZ|release clip|new_window=true] on the back side of the connector, behind the logic board, and pull the connector straight out. |