1. Adımdaki Değişiklikler
Düzenleyen: Shelby Hemphill —
Düzenleme onaylandı tarafından Jeff Suovanen
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] flip your laptop upside down and remove all outer screws (6 in total) |
|---|---|
| - | [* black] pop open the battery and remov all visible screw (7 in total) underneath |
| - | [* black] flip your laptop rightside up and pry the cornes of the bezel pushing it up at the same time |
| - | [* black] as soon as you free the bezel from the base the keyboard will loosen |
| - | [* black] carefully remove the ribbon connections of the keyboard and power/wifi button (while your at it do some cleaning) |
| - | [* black] disconnect and re-connect the monitor ribbon (white connector on the left side) and make sure it seats tight in the connection |
| - | [* black] do some reverse engineering and return all connections back (you may have to spend more time connecting the keyboard/bezel to the base making sure it seats flushed smoothly) |
| - | [* black] power your laptop on and your monitor should be up and running |
| + | [* black] Remove the 6 outer screws on the underside of the laptop. |
| + | [* black] Open the battery compartment and remove the 7 visible screws. |
| + | [* black] Pry the corners of the bezel at the base of the keyboard, pushing up until it loosens. |
| + | [* black] Carefully remove the ribbon connections of the keyboard, power button, and wifi button. |
| + | [* black] Disconnect and re-connect the white monitor ribbon located on the left side to make sure it seats tight in the connection. |
| + | [* black] Reassemble the laptop by following these steps in reverse. |
| + | [* black] The monitor should work when powered on again. |