Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Eric Essen

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Carefully lift the logic board up and pull it away from you.
[* icon_note] This step requires some force, but if the logic board will not come up, make sure that you have removed all the necessary screws and connectors. Warming the heatsink with a heatgun or blow dryer will help release the logic board.
[* icon_note] This step requires some force, but if the logic board will not come up, make sure that you have removed all the necessary screws and connectors. Warming the heatsink with a heatgun or blow dryer will help release the logic board.
[* icon_note] On 800 MHz and above G4s, you must disconnect the fan cable from the logic board before you lift the board entirely off.