6. Adımdaki Değişiklikler
Adım Satırları
| [title] Separate the lenses from the PCB | |
| [* red] Remove four more screws. The bottom left screw will release the audio board support. | |
| [* black] Peel back the lenses at a 45° angle from the bottom up. | |
| - | [* light_blue] You'll then see two yellow strips held with black protective tape. Peel back the tape with tweezers. |
| + | [* light_blue] You'll then see two yellow strips held with black protective tape. Peel back the tape with [product|IF145-020|tweezers]. |
| [* yellow] Also with tweezers, remove the yellow tape over the connection between the PCB and the lenses. | |
| [* icon_note] The lenses appear to be fresnel on the inside but smooth on the outside. |