Bu Adımdaki Değişiklikler
Düzenleyen: nicolay.94 —
Düzenleme onaylandı tarafından nicolay.94
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case. |
|---|---|
| + | [* black] Insert the flat end of a spudger into the gap. |
| + | [* black] The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, rock the screen up and down to weaken the adhesive until you can fit a spudger inside. |
| + | [* black] While pulling up on the suction cup, twist the spudger to widen the opening between the screen and rear case. |