Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

2. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen

Düzenleme onaylandı tarafından Jeff Suovanen

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Use the tip of a spudger to push the camera cable connector toward the fan and out of its socket on the logic board.
[* icon_noteicon_caution] Be sure to push parallel to the board, pushing first on one side, then the otherother, to slowly "walk" the connector out of its socket. Do not pry up, or you will damage the socket.
[* black] Use the tip of a spudger to push the camera cable connector toward the fan and out of its socket on the logic board.
[* icon_noteicon_caution] Be sure to push parallel to the board, pushing first on one side, then the otherother, to slowly "walk" the connector out of its socket. Do not pry up, or you will damage the socket.