2. Adımdaki Değişiklikler
Düzenleyen: johnsawyercjs —
Düzenlenme reddedildi tarafından Alex Diaz-Kokaisl
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* red] Remove the two 3.1 mm T5 Torx screws securing the I/O board to the logic board. | |
| - | [* orange] On some models, also removing the silver 3.5 mm T5 Torx screw from the heatsink can aid in I/O board removal. |
| + | [* orange] On some models, also removing the silver 3.5 mm T5 Torx screw from the end of the heatsink pipe can aid in I/O board removal. |
| [* black] Carefully lift the I/O board and remove it from the lower case. | |
| + | [* black] While the I/O board is removed, use a can of compressed air and a soft brush to remove any dust you find on it and in the location it's installed. |