Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Joseph Sctbunio

Düzenleme onaylandı tarafından Joseph Sctbunio

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[title] Remove keyboard, disc drive & hard drive screws
+[title] Remove keyboard, disc drive & SC reader screws
[* red] Get out the Philips #1 bit, and unscrew the three captive screws securing the keyboard.
[* orange] Remove the single captive Philips screw securing the disc drive, then pull the disc drive out.
-[* yellow] Remove the two captive Philips screws securing the Smart Card (SC) reader.
+[* yellow] Remove the two captive Philips screws securing the Smart Card (SC) reader, then lift the SC reader up. The SC reader is hinged at the point opposite to the screws.