6. Adımdaki Değişiklikler
Adım Satırları
| [* black] Mark each motor according to the side it attaches. The rumble motors are different so they will not work if you switch them. | |
| - | [* icon_ |
| + | [* icon_note] Take note where the red and black wires attach because they should be attached the same way as the original. |
| [* icon_note] Use the [guide|750|Soldering Iron Guide] to help you with removing and attaching the wires. | |
| + | [* black] Turn over the controller so that the thumbsticks are facing down. |
| [* red] Use tweezers and a soldering iron to remove the black and red wires from the motherboard. This will release the rumble motor from the controller assembly. |