1. Adımdaki Değişiklikler
Düzenleyen: Aubrey Woern —
Düzenleme onaylandı tarafından Aubrey Woern
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Turn the 3D printer on using the power switch. | |
| [* black] Move the head to the highest position on the Z axis. This provides working room to access the head. | |
| - | [* black] Heat the nozzle up. This step depends on what type of filament is currently in the machine |
| + | [* black] Heat the nozzle up. This step depends on what type of filament is currently in the machine (e.g. 190 for PLA, 220 for ABS). |
| [* black] Remove filament from the 3D printer. | |
| [* black] Clean off the old nozzle with tweezers. |