HTC Vive Sensor Array Replacement 3 No'lu Adım Geçmişi

3. Adımdaki Değişiklikler

Düzenleyen: Gabriel Medina-Kim — 19 Eki 2017

Düzenleme onaylandı tarafından Gabriel Medina-Kim

	[* icon_caution] Be careful not to lift the sensor array too far from the rest of the device because the remaining ribbon cable may tear.
	[* black] Slightly lift the sensor array away from the rest of the Vive and hold it in place.
	[* black] Disconnect the camera by lifting its connector up and away from the motherboard using a pair of ESD safe tweezers.
+	[* black] *<PIC> cleared picture 2, new pic showing ribbon cable from better angle. As is, hard to realize its a ribbon cable.*
	[* black] Lift the sensor array away from the motherboard.
+	[* black] *<PIC>maybe replace pic 3 with pic with both sensor array and rest of Vive*