Eşyalarını Tamir Et Topluluk Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Caleb Watts —

Düzenleme onaylandı tarafından Caleb Watts

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_caution] Be careful not to lift the sensor array too far from the rest of the device because the camera ribbon cable may tear.
-[* black] Slightly lift the sensor array away from the rest of the Vive and hold it in place.
+[* black] Lift the sensor array away from the rest of the Vive until the camera cable tugs back and hold it in place.
[* red] Disconnect the camera by lifting its ribbon cable up and away from the motherboard using a pair of ESD safe tweezers.
- [* icon_note] The camera ribbon cable must be pulled out of its socket vertically, as opposed to all other ribbon cables which slide out vertically.
+ [* icon_note] The camera ribbon cable must be pulled out of its socket vertically, as opposed to all other ribbon cables which slide out horizontally.
[* black] Lift the sensor array away from the motherboard fully.