Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: Jesse Wilson

Düzenleme onaylandı tarafından Jesse Wilson

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Remove the two 75mm torx-6 security screw at the bottom left and right corners.
-[* black] Remove the two rumble motors out of its holders at the bottom left and right corners.
+[* black] Remove the two 75mm torx-6 security screws in the bottom left and right corners.
+[* icon_caution] If the rumble motors fall out of frame, the wires may disconnect from the mother board.